Sizing

Please read safety information of you’re new product

Sticker , Decal , vinyl sticker user’s guide and safety sheet

*Stickers are sticky and big stickers are even stickier, handle with care*

* Not recommended for children under 12 years of age.

* Keep packaging, stickers, backing sheet and installation film out of the reach of 

children and infants, they are a potential choke hazard.

* When backing is removed from stickers they can be very sticky, adult supervision is recommended.

* For vehicle use, when choosing a place to apply sticker, decal or vinyl sticker to a vehicle window, do not create a blind spot for the driver, be sure to place in an area that will not hinder the view of the driver in all directions. Be sure to check in mirrors that it does not hinder drivers view of exterior.

* For vehicle use, is applying sticker, decal or vinyl sticker to the interior side of a window of a vehicle, it is not recommended to place on the window defrost systems, as it could damage components of the system.

* For vehicle use, when choosing a place on the exterior of widow, do not place in a area that could hinder or block window wiper operation.

* Plastic can be slippery, do not leave packaging, sticker, backing or installation film on floor.

* When installing stickers, decals or vinyl sticker on floor, do not place them were someone could slip and fall.

* Dispose of packaging, backing sheet and installation film when they are no longer need. Please recycle when possible or the laws require.

* Stickers are made to adhere were they are placed, be aware that the installation over any other sticker, decal or vinyl sticker, window tinting or on a vinyl or plastic surface, removal of the sticker may damage such elements if the sticker is removed.

* These products are to placed on objects, they are not to be installed on persons or animals.

* Sticker adhesive on backing may be an irritant.

* Do not place sticker, decal or vinyl sticker on or block ventilation openings for cooling or heating systems, for it can create system failure and/or fire hazard.

* Do not place sticker, decal or vinyl sticker, on a surface that generates or is exposed to excessive heat, as not to create a fire hazard.

* Stickers have a sticky back surface when the backing sheet is removed handle with care.

* Before applying to the surface of protective equipment for work, sports or leisure, refer to manufacture’s recommendations before applying.

Thank you for purchasing a Sticky-This product, we hope that it will bring you joy for the years to come, that is why we make them.

Please read thoroughly installation guide before beginning installation

Product notes :

 Sticker are sticky and big stickers are even more stickier, handle with care.

 If you have a sticker, there is a front with the image and a back with an adhesive coating, the back will have a protective backing sheet to protect adhesive. Do not remove the protective sheet till it is time to fix it to the surface.

 If you have a decal or vinyl sticker, there will be a protective back sheet and a transparent installation film on the front/other side, this is the work side, the side up. This film is for installation purposes, do not remove until installation is completed. If you have a decal or vinyl sticker for placing on the inside of a window, it is possible that the image is not visible at the moment, it is made to be visible on outside of window, once applied to surface.

Installation procedure :

* Read safety and safety recommendations, before installation.

* Chose place that sticker is to be placed.

* If area is not clean, clean area to remove grease and debris from surface, if you use dishwashing detergent, thoroughly rinse surface before installing.

* Dry surface and the surrounding area, where sticker is to be applied.

* Chose in what direction you want to apply it.

* For decal and vinyl stickers, the adhesive side is the side that is opposite the one with the transparent film.

* Once place has been chosen, peel of a small section of the protective back sheet to reveal adhesive surface from sticker, on the edge that you want to start with.

* Holding on the starting edge, hold of backing protection sheet with other hand, slightly bending sticker so the opposite edge faces towards you.

* It is recommended to start from one edge and to progress towards the opposite side , when sticking to surface.

* After starting edge has been placed, tack the exposed border edge area, with a medium pressure, so it adheres to surface, still holding backing sheet with other hand.

* Slowly working to the opposite edge, apply enough pressure, with fingers or a soft cloth, to make product adhere to surface, while peeling back the protection backing sheet as you progress to the opposite side.

* Once product is entirely tacked to surface, backing sheet completely removed, starting from center and working towards edges in a circular motion, with fingers or a soft cloth, applying greater pressure to complete the adhesion.

* If it is a sticker you’re done. Enjoy, if not just a few more steps.

* If installing a decal or vinyl sticker, before removing installation film, using a sticker application tool or a plastic card, credit card type, continue making passes from center to the edges and then in all directions., applying enough pressure to complete adhesion.

* Finally, it is time to remove the installation film, taking it from a edge, slowly peel of the surface, if sticker peels away with film, stop peeling film off, return it to its position and rub over area of sticker that was not completely adhered and recommence removal of application film.

* That is it you are done. Admire you’re work.